Filters

Wood cleaning products

WOCA Lint Free Oiling Cloth
£2.16

Need help?

WOCA Oiling cloths are made from lint free cotton and are designed to be used when removing excess oil from your flooring and furniture.

Each Cloth is approx 550mm x 500mm

£2.88

Need help?

Woca Beige Applicator Pad for use with the WOCA Doodlebug Floor Applicator

The Woca Doodlebug incorporates a hook and loop base for strong attachment to the Woca Beige Applicator Pads. When applying and spreading the oil, it naturally generates heat and friction which forces the oil into the wood leaving the hardest of finishes.

Applicator Pad size: 115mm x 250mm / 20mm Thick

Underlay 3mm Thick. 15m2 Roll

Underlay 3mm Thick. 15m2 Roll

by Natural Wood Floors
£24.00
£24.00

Need help?

A moisture and sound resistant underlay for floating floors. 19dB reduction on transmitted impact noise. Compatible with underfloor heating. 3mm thickness. Available per 15m² roll.

£78.00

Need help?

A moisture and sound resistant underlay for floating floors. Dual moisture barrier with 200mm overlap. Excellent levelling properties. Unique construction allows for efficient ventilation. 20dB reduction on transmitted impact noise. Compatible with underfloor heating. 3mm thickness. Available per m² or 33m² roll.

WOCA Worktop Gel 400ml

WOCA Worktop Gel 400ml

by WOCA
£17.21
£17.21

Need help?

A highly water- and dirt-repellent oil for wood surfaces.

Worktop Gel is used to fresh up previously oil treated wood surfaces. The effective gel is quick-drying, enhances the colour and natural grain of the wood and gives a resistant and strong surface.

Available in:
0.40 litre

Consumption:
6-12 m2/l 68-129 sq.ft./l

How to apply

Step 1
Clean the surface thoroughly with WOCA Wood Cleaner mixed with water in the ratio 1:40 and let it dry for at least 8 hours until the surface is completely dry. In case of grain raising, an advantage would be slightly to de-nib with fine sand paper, grit 220 (remove any sanding dust from the surface).

Step 2
Spread a suitable layer of gel in an even, thin coat with a polishing pad (white, beige or red). Continue polishing until the wood appears saturated and the surface looks uniform. We recommend working in sections as the gel dries quickly.

Step 3
Wipe off the polished surface carefully with a dry lint-free cloth before continuing to next area. The surface should not appear wet and there should not be any excess gel left on the surface after polishing. In case the wood does not seem completely saturated after 4-6 hours, we recommend re-polishing with a smaller quantity gel than by first treatment, but same procedure. Leave the worktop to dry for 4-6 hours, hereafter it may cautiously be taken into use. If possible, do not expose the surface to water during the first 2-3 days. We recommend leaving the worktop to harden for 3 days. After the hardening time, the surface can be cleaned with WOCA Natural Soap Spray and a lint-free cotton cloth.

Step 4
The regular cleaning may be done with WOCA Natural Soap or WOCA Oil Soap which at the same time provides the wood with caring oil by each cleaning. Depending on wear, it is possible to maintain. Water spots and other minor damages are easily repairable by cleaning the surface locally with WOCA Wood Cleaner, let it dry and polish with a smaller quantity of Worktop Gel on a lint-free cloth.

£9.36

Need help?

WOCA White Pads with Handle are ideal for the application and polishing / buffing of WOCA Maintenance Oil or Maintenance Paste.

150mm x 90mm

(Use floor machine for larger areas)
WOCA Natural Soap Spray

WOCA Natural Soap Spray

by WOCA
£14.33
£14.33

Need help?

Natural Soap is ideal for cleaning and maintenance of oiled, waxed and natural soaped surfaces. Natural Soap is a pre-mixed quality soap, which due to its nourishing properties quickly closes the pores of the wood and protects against dirt and penetration of liquids. Natural Soap white and grey are recommended for surfaces treated with white and grey oil, while Natural Soap natural is ideal for surfaces treated with natural or Colour Oil. The Spray makes the maintenance of oiled furniture, doors, table tops, panels, stairs, doors, etc. easier.

Availble in 0.75l

How to apply

Step 1
Shake the spray well before use

Step 2
Spray the Natural Soap on the surface.

Step 3
Wipe the surface with a cotton cloth. Please note: Don't use microfiber.

WOCA Natural Soap

WOCA Natural Soap

by WOCA
£15.77
£15.77

Need help?

WOCA Natural Soap is ideal for cleaning and maintenance of oiled, waxed and soaped surfaces. The Natural Soap is especially ideal for floors, furniture, table tops and panels. The oily Natural Soap forms a protective film on the floor. Natural Soap white is used for light wood species and Natural Soap natural for dark wood species. Natural Soap may be used for cleaning of most oiled floors.

Natural Soap is a purpose-made quality soap, which due to its nourishing properties quickly closes the pores of the wood and protects against dirt and penetration of liquids.
  • Available in 1 Litre & 2.5 Litre
  • Consumption: 320-400 m2/litre
£55.67

Need help?

WOCA Maintenace Box for PVC, Laminated & Lacquered Surfaces contains everything you need to clean and to rejuvenate your lacquered floor, is made for all lacquered surfaces and is especially suitable for the regular maintenance. WOCA Maintenance Box for Lacquered Floors strengthens the lacquer as it protects against wear and scratches and hereby prolongs the lifetime of the lacquered surface and does not build up a thick layer on the floor surface as the old layer is renewed with the next application.

Kit Contains:
  • 1L Woca Wood Cleaner
  • 1L Woca Vinyl & Lacquer Care
  • 1L Woca Vinyl & Lacquer Soap
  • 1 x Woca Lint Free Cloths
WOCA Hardwax Oil 0.75 litre

WOCA Hardwax Oil 0.75 litre

by WOCA
£28.79
£28.79

Need help?

WOCA Hardwax Oil is used for oil finishing of wooden floors manually or with polishing machine. The oil ensures an extremely hard-wearing and light film-building surface. WOCA Hardwax Oil is ideal for basic finishing of any unfinished, new and newly sanded interior woodwork, or for topcoat on WOCA Colour Oils.

Polishing machine is recommended for the polishing of bigger areas.

Coverage: 8 - 12 m2 per Litre /  20-30m2 per 2.5L
WOCA Exterior Oil Natural 2.5L
£50.40

Need help?

Woca Exterior Oil to be used outdoor for basic treatment and maintenance of new and previously oiled wood surfaces such as decks, garden furniture, cladding etc.
  • Provides a strong water and dirt repellent surface
  • Enhances the natural colour and grain of the wood
  • Fast drying
  • Delays emergence of mold and fungus
  • Contains UV-protection
Woca Exterior Oil is used for basic treatment and maintenance of new and previously oiled wood surfaces such as decks, garden furniture, cladding etc. The special water-based composition of oil components ensures that the product is water-dilutable and eco-friendly. The oil ensures a strong water and dirt repellent surface and delays emergence of mould and fungus. The oil enhances the natural colour and grain of the wood. Exterior Oil is available in natural as well as a number of exciting colours. All varieties have UV protection.
  1. Stir the oil thoroughly before use.
  2. Apply an even and thin coat of oil with the WOCA Applicator or a brush. Begin with the butt ends of the wood. The wet oil may have a white shade. When the water has evaporated after a few minutes, the wood will appear oiled.
  3. Wipe off any excess oil with clean cotton cloths after no more than 5 minutes. Take particular care in removing excess oil from joints and grooves.
  4. Repeat step 2 and 3 if the surface does not appear saturated with oil.
  5. When the wood is dry, it may be polished with a polishing pad or polishing machine to ensure an extra hardwearing surface.
  6. Depending on weather conditions and outdoor temperature it takes 24 to 48 hours for the oil to harden thoroughly. The wood must not be exposed to water during this period.
Repeat the oil treatment as required.
WOCA Blue Swep Mop

WOCA Blue Swep Mop

by WOCA
£27.53
£27.53

Need help?

Woca swep mop, complete, blue: great for cleaning oil-covered and varnished (soap paint) floors, cotton fibre head is removable and washable

Champagne Style Cork Stool Sale

Champagne Style Cork Stool

by Natural Wood Floors
Sale
£190.00
£160.00
£160.00

Need help?

Our Unique and very cool Champagne Cork Stool. Made from Natural cork. 

The seat is made from 100% natural cork, very Eco Friendly, 100% recyclable.

Dimensions:

H 45cm x W 30cm

Free Delivery to mainland UK with this item.

Metal Base Cork Stool Sale
£220.00
£195.00

Metal Base Cork Stool

Metal Base Cork Stool

by Natural Wood Floors
Sale
£220.00
£195.00
£195.00

Need help?

Our Unique and very cool Bar Stool. Made from Natural cork with a steel frame. 

The seat is made from 100% natural cork, very Eco Friendly, 100% recyclable  with a steel base.

Dimensions:

H 75cm x W 40cm

Free Delivery to mainland UK with this item.

Wicanders Click Seal

Wicanders Click Seal

by Wicanders
£9.95
£9.95

Need help?

  • Click Seal guards high-traffic floors against moisture damage. For both commercial and residential use. Prevents joint swelling.  Quickly and easy installation: apply a bead to tongue of plank, then click together. Easily applied and excess lifts right off with no residue. New 125mm tube will cover 5 square metres of flooring

    Wicanders Power Polish

    Wicanders Power Polish

    by Wicanders
    £34.99
    £34.99

    Need help?

    • Power polish

      Wicanders Power Polish is a long-term maintenance product for the care of Wicanders Floors with HPS, WRT and PU acrylate UV. It is easy to apply and provides a protective coating.

       

      • Size: Power Polish is sold in 1L containers
      • Application: By short hair mop/wax applicator (Ex. LOBATOOL)
      • Coverage: 3L will cover approximately 1000 sq.ft., depending on application rate

       

      Power Polish Instructions:

      • Make sure the floor is clean and dry; clean it with Wicanders® Soft Cleaner; a basic clean is recommended for Corkcomfort Floating WRT & HPS
      • Apply one coat of Power Polish evenly, using a soft mop application tool. 3L will cover approximately 1000 sq.ft.
      • Let the floor dry completely (about 30 minutes); do not polish after using the maintenance products
      • Clean all tools with water, immediately after use
      • The frequency of maintenance depends on the traffic and on the floor visual aspect
    Aquastop 3mm underlay. 15m2 Roll

    Aquastop 3mm underlay. 15m2 Roll

    by Natural Wood Floors
    £32.00
    £32.00

    Need help?

    A moisture and sound resistant underlay for floating floors, with integrated DPM (Damp Proof Membrane) 19dB reduction on transmitted impact noise. Compatible with underfloor heating. Thermal Conductivity 0.045W 3mm thickness. Available per 15m² roll.

    WOCA Worktop Oil 0.75L

    WOCA Worktop Oil 0.75L

    by WOCA
    £25.92
    £25.92

    Need help?

    A highly water- and dirt-repellent oil for wood surfaces.

    Worktop Oil is designed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface highly water -and dirt-repellent. Use Worktop Oil, Natural, on both dark and light wood species – such as mahogany, merbau, teak, cherry, ash, oak, beech, maple, birch, pine etc. - to give the wood a mellow, golden colour. Use Worktop Oil, White, to lighten up the wood or give it a whitewashed effect.

    Available in:
    0.75 litre

    Consumption:
    12-15 m2/l 129-161 sq.ft./l

    How to apply

    Step 1
    If the surface is particularly smooth, sand the surface with sandpaper grit 180. Make sure the wood is dry and devoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours.

    Step 2
    Stir the oil thoroughly before use. *Use a paintbrush to apply a suit­able amount of oil in an even, adequate coat

    Step 3
    Wait approx. 20-30 minutes at 20º C as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet in wet lengthwise the wood grain with sandpaper grit 320-400. Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface.

    Step 4
    Carefully polish the wood using a white polishing pad, which makes the surface more hard-wearing. *Repeat the treatment on highly absorbent surfaces. *The oil is thoroughly hardened after 24 hours at 20º C. Do not let the tabletop become wet during the hardening process. Maintenance: Use Worktop Oil to maintain the tabletop four times a year, or as often as necessary. Always clean the worktop first using Wood Cleaner. Follow the same procedure, but apply only one coat of oil. Risk of self-ignition: Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.

    WOCA Wood Lye for wooden floors
    £36.00

    Need help?

    Wood Lye is used for lye priming of unfinished or newly sanded interior woodwork i.e. floors, stairs, furniture and panels. The priming prevents the wood from yellowing and enhances the wood grain creating a coloured wash effect, depending on the chosen colour.

    Wood Lye may be used on all types of wood. Comes in White and Grey.
    WOCA Spot Remover

    WOCA Spot Remover

    by WOCA
    £20.09
    £20.09

    Need help?

    Spot Remover effectively dissolves grease, blood, coffee, tea etc. May be used on unfinished, soaped, oiled or waxed interior surfaces.

    Spot Remover is based on soap and is specially developed for indoor use to remove spots from oiled wood surfaces.

    Available in 0.25l

    How to apply

    Step 1
    Before using Spot Remover it is advisable to make a small test at a non-visible place of the floor to ensure that there will be no undesired reaction.

    Step 2
    Spray Spot Remover evenly on the stain directly from the bottle. *Leave the Spot Remover to dissolve the stain for 10-20 min

    Step 3
    Now scrub with a brush till the stain has been dissolved. *Wipe with cloth wrung in lukewarm water.

    Step 4
    Repeat operation if necessary. *When the floor is completely dry apply the original surface finish, e.g. oil, wax or soap to re-establish the protection of the surface

    WOCA Softwood Lye for wooden floors 2.5L
    £39.60

    Need help?

    WOCA Softwood Lye is used for lye priming of unfinished or freshly sanded interior woodwork such as floors, stairs, furniture, and panels. The priming prevents the wood from yellowing and enhances the natural grain of the wood producing a white wash finish.

    WOCA Softwood Lye may be used for all types of soft wood such as pine, spruce, and pitch pine. Used on larch wood, an antique grey to brownish finish is created. WOCA Softwood Lye may not be used on hardwood.

    By use of softwood lye on spruce the wood may assume a greenish colour which will disappear in the course of time
    WOCA Pre-Colour Grey 2.5L

    WOCA Pre-Colour Grey 2.5L

    by WOCA
    £61.84
    £61.84

    Need help?

    Pre-Colour is a water-based stain used for the priming of unfinished or freshly sanded interior woodwork i.e. floors, stairs, furniture and panels. Pre-Colour enhances the wood grain prior to a protecting oil or lacquer finish. Pre-Colour may be used on all types of wood.

    Available in
    Pre-Colour is available in the container size of 2,5 litre container and in the colours white, extra white and grey.

    Tools
    Brush, plastic bucket and stick for stirring. Clean tools in water.

    How to do...

    The unfinished woodwork must be well sanded, clean and dry before application of the Pre-Colour. Clean with 125 ml Wood Cleaner mixed with 5 l water. Shake the container. Pour the Pre-Colour into a plastic bucket and stir regularly in order to obtain a uniform result.
    Apply the undiluted Pre-Colour in an even layer length wise onto the floor with a paint brush. Use at least 1l of Pre-Colour per 10 m2. On vertically mounted woodwork, apply from top to bottom. Clean tools in water.
    When the wood is dry, clean with Wood Cleaner and leave to dry or alternatively use green pad under floor machine and subsequently vacuum clean the floor. Finish the floor with Wood Floor Oil, Master Oil, Colour Oil, High Solid Master Oil or Oil Lacquer.
    £86.40

    Need help?

    For making a one-coat application

    There are 6 discs in a pack and each disc is 150mm in diameter with a Velcro back

    Application area - With the introduction of the green WOCA Patina Discs, WOCA presents a new revolutionary way of oiling floors. By using the WOCA Patina Discs it is now possible to make a one-coat application of the floor. The surface is saturated immediately, becomes hard-wearing, silky smooth, and easy to maintain.

    Result - The floor is well saturated, feels soft, dries quickly and has a silky-mat gloss. In order to achieve this result, we recommend using WOCA High Solid Master Oil, natural or white. The oil has a low content of solvent and fills the grains of the wood excellently. This guarantees a hard-wearing surface.

     

    WOCA Oil Refresher

    WOCA Oil Refresher

    by WOCA
    £19.37
    £19.37

    Need help?

    WOCA Oil Refresher is a mild maintenance agent for the cleaning and maintenance of oiled floors. It combines optimum cleaning with a simultaneous re-application of oil. The oil component provides the surface of the wood with an additional matt protective film.

    Available in Natural or White

    Product size = 1 litre or 2.5 litre
    Drying time: 2 hours at 20°C.
    Coverage = 150 - 200 square metres per litre

    Please Note, Oil Refresher may not be used on lacquered surfaces!